[. . . ] If you use your Hand Vac properly and only for what it is intended, you will enjoy years of safe, reliable service. WARNING: Look for this symbol to point out important safety precautions. [. . . ] If the Hand Vac is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to your nearest Authorised Ryobi Service Centre. Maintenance or repair work performed by unqualified personnel could result in personal injury. Use of unauthorised parts or failure to follow the maintenance instructions could result in electric shock or serious injury. Before attempting to use your Hand Vac, familiarise yourself with all operating features and safety requirements. WARNING: If any parts are missing, do not operate your Hand Vac until the missing parts have been replaced. Remember that a careless fraction of a second is sufficient to inflict severe injury. Your hand vac is equipped with an ON/OFF switch located on top of the tool. 4 kg (without power pack / with power pack) The running time with fully charged battery pack is approximately 10 min. Your Hand Vac is equipped with an ON/OFF switch located on top of the tool. As shown in figure 2, push the switch forward to switch the Hand Vac ON. Align the slots on the bottom of the dust bowl with the tabs on the bottom of the motor housing then snap the two sections together. To install the battery pack, slot it into the Hand Vac as show in figure 3. [. . . ] In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. This warranty in no way affects your legal rights concerning defective products. [. . . ]